Output of a single stimulus stored in a file.

Author

Jan Benda

Version

1.8 (Feb 26, 2015)

Options

• Waveform
  • waveform=From file: Stimulus waveform (string)
  • stimfile=: Stimulus file (string)
  • stimampl=0: Amplitude factor (standard deviation) of stimulus file (number)
  • amplitude=1nA: Amplitude of stimulus (number)
  • freqsel=frequency: Specify (string)
  • freq=10Hz: Frequency of waveform (number)
  • period=100ms: Period of waveform (number)
  • numperiods=1: Number of periods (number)
  • pulsesel=pulse duration: Specify (string)
  • pulseduration=10ms: Pulse duration (number)
  • dutycycle=50%: Duty-cycle (number)
  • tau=1000ms: Time-constant (number)
  • seed=0: Seed for random number generation (integer)
  • startfreq=1Hz: Start sweep with frequency (number)
  • endfreq=100Hz: End sweep with frequency (number)
  • cycleramp=0ms: Ramp for each cycle (number)
  • duration=1000ms: Maximum duration of stimulus (number)
  • ramp=0ms: Ramp for stimulus onset and offset (number)
• Stimulus
  • offset=0nA: Stimulus mean (number)
  • offsetbase=absolute: Stimulus mean relative to (string)
  • samerate=true: Use sampling rate of input (boolean)
  • samplerate=1kHz: Sampling rate of output (number)
  • repeats=10times: Number of stimulus presentations (number)
  • pause=1000ms: Duration of pause between stimuli (number)
  • before=100ms: Time before stimulus to be analyzed (number)
  • after=100ms: Time after stimulus to be analyzed (number)
  • outtrace=Current-1: Output trace (string)
• Offset - search
  • userate=false: Search offset for target firing rate (boolean)
  • rate=100Hz: Target firing rate (number)
  • ratetol=5Hz: Tolerance for target firing rate (number)
  • offsetstep=8nA: Initial offset step (number)
  • searchrepeats=2times: Number of search stimulus presentations (number)
  • silentrate=0Hz: Ignore response below (number)
  • maxsilent=1: Number of stimulus presentations if response is below silentrate (integer)
  • skippause=true: Skip pause if response is below silentrate (boolean)
  • maxsearch=1intensities: Stop search if response does not change for more than (integer)
  • method=Bisect: Method (string)
  • minslope=4Hz/nA: Minimum slope required for interpolation (number)
  • searchduration=0ms: Maximum duration of stimulus (number)
  • searchpause=0ms: Duration of pause between stimuli (number)
• Analysis
  • skipwin=100ms: Initial portion of stimulus not used for analysis (number)
  • sigma=10ms: Standard deviation of rate smoothing kernel (number)
  • storevoltage=true: Save voltage trace (boolean)
  • plot=Current voltage trace: Plot shows (string)
  • Save stimuli
    • storemode=session: Save stimuli in (string)
    • storepath=: Save stimuli in custom directory (string)
    • storelevel=all: Save (string)